When Dot Drop-out Cannot be Cleared Up
69
Chapter 3 Maintenance Chapter 3 Maintenance
Press several times until the screen shown on the
left appears.
Press
.
Press
twice.
Press .
Make sure the cleaning liquid is ready.
Press
.
Make sure the drain bottle is empty, and then press
.
If it is not empty, redo from Step
.
Be sure to discard the discharged ink.
Thereafter, follow the on-screen instructions to carry out the operations.
After cleaning has nished, the sub power is automatically switched o.
Start lling ink.
See "First Step Guide" and promptly ll with ink. When lling with ink, you use (two) SOL INK cleaning
cartridges again.
CLEANING LIQUID
IS REQUIRED
To Next Page
Loading...
