Roland Soljet EJ-640 - The Media Heating System Doesnt Warm up; It Is Not Possible to Check the Amount of Discharged Fluid in the Drain Bottle

Other Problems
6
FAQ
129
The Media Heating System Doesn't Warm Up
Is media loaded?
The media heating system does not warm up to the set temperature when is o (by default). Load
the media and wait for the machine to warm up.
 P. 85, "Fully Utilizing the Media Heating System"
Is the temperature of the room too low?
Use the machine in an environment where the temperature is 20 to 32°C (68 to 90°F).
It Is not Possible to Check the Amount of Discharged Fluid in the Drain Bottle
Is ink splattered around the inside of the drain bottle?
If ink is splattered around the inside of the drain bottle, it may not be possible to check how much discharged
uid the bottle contains.
 P. 53, "If It Is Not Possible to Check the Amount of Discharged Fluid in the Drain Bottle"