Roland Soljet EJ-640 - Pausing and Canceling Output; Cutting off the Media

Outputting
2
Basic Operation
45
Pausing and Canceling Output
You can pause and cancel output before it nishes. We do not recommend resuming output because horizontal
stripes are produced at the place where output stopped.
Procedure

Press before output nishes.
This pauses the printing operation.
Press again to resume printing.
To cancel the output, go the next procedure without pressing .

When the screen shown in the gure appears, hold down
for one second or longer.
This cancels the printing operation.

Stop sending the data from the computer.
Cutting Off the Media
Procedure

Remove the left and right media clamps.

Close the front cover.

Check that is lit.
TO CANCEL HOLD
DOWN SETUP KEY