Configuring the Various Settings (UTILITY)
107
Restoring the Factory Settings (FACTORY RESET)
This operation restores the sample and pattern data as well as the system settings saved on this unit to their factory defaults.
Doing this causes all data saved on this unit to be lost.
To save the data of this unit, use the backup function to make a backup (Backing up Your Data (BACKUP)(P.105)).
1.
Hold down the [SHIFT] button and press the pad [13].
The UTILITY MENU screen appears.
2.
Use the [VALUE] knob to select “FACTORY”, and press the [VALUE] knob.
The UTILITY / FACTORY RESET screen appears.
3.
Turn the [VALUE] knob to select the data to initialize, and press the [VALUE] knob to confirm.
Explanation (data to initialize)
This initializes all data. The samples and patterns are restored to the factory default data.
This restores the settings for the system parameters and effect parameters to their factory defaults. This
has no effect on the samples and patterns.
A confirmation message appears, asking if you want to initialize the data.
4.
If you wish to initialize, turn the [VALUE] knob to select “OK”, and press the [VALUE] knob.
The message “Please Power OFF” appears.
5.
Turn this unit’s power off, and then on again.
To Next Page
Loading...
