Roland SP-404MK2 - Organizing the Pattern Data; Exchanging (Swapping) Patterns between Pads; Copying the Pattern of a Pad

Editing a Pattern (PATTERN EDIT)
70
Organizing the Pattern Data
This section explains the functions for making effective use of the patterns.
Exchanging (Swapping) Patterns Between Pads
Here’s how to exchange (swap) the patterns that are assigned to two different pads.
You can’t perform the following operations while a pattern is playing back. Stop the pattern before performing the operation.
1. Hold down the [SHIFT] button and press the pad [5].
The EXCHANGE screen appears.
2. Press the two pads in order, for which you want to exchange the patterns.
To cancel exchanging, press the [EXIT] button.
You can use the bank [A/F]–[E/J] buttons to select a bank before pressing the pads. It’s also possible to exchange patterns
between different banks.
3. Press the [VALUE] knob or [COPY] button.
The patterns of the pads are now exchanged.
Copying the Pattern of a Pad
Here’s how to copy the pattern that’s assigned to a pad to a different pad.
1. Press the [COPY] button.
The COPY screen appears.
2. Press the pads in order, beginning with the pattern (pad) you want to copy, and then the copy
destination pattern (pad).
If you decide to cancel copying, press the [EXIT] button.
You can use the bank [A/F]–[E/J] buttons to select a bank before pressing the pads. It’s also possible to copy patterns between
different banks.
3. Press the [VALUE] knob or [COPY] button.
The pattern for that pad is copied.