EasyManua.ls Logo

Roland SP-404MK2 - Harmony; Gt Amp Sim

Roland SP-404MK2
136 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix
125
Parameter
Value
Explanation
NOTE
-17– -1, 118
Sets which note in the chromatic scale should sound, counting from the root of
the SCALE value. The scale and chord structure that is used depends on the
SCALE and CHORD settings.
The NOTE value can be controlled via note messages from a MIDI keyboard
connected to the MIDI IN connector, a computer connected via USB, a DAW
app running on an iOS device and so on.
At that time, you can send pitch bend messages to continuously change the
pitch.
For note messages (Note Number = 0127) and pitch bend messages, set the
MIDI channel on your external device to “11”.
FORMANT
-100100
Adjusts the formant of the voice. Lower settings give a more masculine vocal
character, and higher settings give a more feminine vocal character.
TONE
-100100
Adjusts the brightness of the effect sound.
SCALE
C majB maj, C minB min
Sets the scale to use and its root.
CHORD
Root, P5, Oct, UpDn,
UpDnP5, 3rd, 5thUp,
5thDn, 7thUp, 7thDn
Sets the chord structure.
BALANCE
100-0–0-100
Adjusts the volume balance between dry (the original sound) and effect sound.
Harmony
This effect adds a harmony to your voice.
Parameter
Value
Explanation
PITCH
-100100
Sets the pitch of the voice. You can change the pitch up and down
one octave.
FORMANT
-100100
Sets the formant of the voice.
Lower settings give a more masculine vocal character, and higher
settings give a more feminine vocal character.
BALANCE
100-0–0-100 (%)
Adjusts the volume balance between the dry (original) sound and
effect sound.
AT PITCH
0–100
Adjusts the strength at which the pitch is corrected.
KEY
CHROMA, A, B³, B, C, D³, D, E³, E, F, G³,
G, A³
Sets the key to which the pitch is adjusted and the harmonies are
added.
HARMONY
Root, P5, Oct, UpDn, UpDnP5, 3rd,
5thUp, 5thDn, 7thUp, 7thDn
Sets the harmonization.
Gt Amp Sim
This effect models a guitar amplifier.
* This is enabled with INPUT FX.
Parameter
Value
Explanation
AMP TYPE
Selects the guitar amp type.
JC
Models the sound of a Roland JC-120.
TWIN
Models a Fender Twin Reverb.
BG
Models a lead guitar sound played using a MESA/Boogie combo amp.
MATCH
Models a Matchless D/C-30.
MS
Models a Marshall 1959.
SLDN
Models a Soldano SLO-100.
DRIVE
0–100
Adjusts the volume and distortion of the amp.
LEVEL
0–100
Adjusts the volume of the effect sound.
BASS
-100100
Adjusts the low-frequency tonal character.
MIDDLE
-100100
Adjusts the midrange tonal character.
TREBLE
-100100
Adjusts the high-frequency tonal character.

Table of Contents

Related product manuals