Roland SP-404MK2 - Setting the Tempo for a Bank or Project

Setting the Tempo
75
Setting the Tempo for a Bank or Project
By assigning a tempo to a bank, the same tempo is used for all patterns within the same bank or project during playback.
The tempo you set becomes the base tempo when playing back samples using BPM SYNC.
1. Hold down the [SHIFT] button and press the pad [11].
The TEMPO SEL screen appears.
2. Use the [CTRL 1] knob to select the base tempo used for BPM SYNC or for playing back patterns.
Value
Explanation
PROJECT
Uses the project tempo as the base tempo.
BANK A–BANK
J
Uses the bank tempo as the base tempo. The value displayed changes according to the currently
selected bank.
3. Use the [VALUE] knob to set the tempo, and then press the [EXIT] button.
You can also set the tempo using the tap tempo function.
“Setting the Tempo in Time with the Rhythm (Tap Tempo)(P.76)”