Roland SP-404MK2 - Cropping Unnecessary Sections from a Pattern (CROP)

Editing a Pattern (PATTERN EDIT)
69
Cropping Unnecessary Sections from a Pattern (CROP)
This deletes all the sections from a pattern except for the range you select.
1. Press the [PATTERN SELECT] button.
2. Press the [PATTERN EDIT] button.
3. Press pads [1]–[16] to select the pattern you want to edit.
The pattern edit screen appears.
4. Set the range you want to keep within the pattern in the LOOP START and LENGTH parameters (“Editing
a Pattern (PATTERN EDIT)
(P.68)”).
5. Press the [VALUE] knob.
A menu appears.
6. Use the [VALUE] knob to select “CROP”, and press the [VALUE] knob.
All sections of the pattern outside of the playback range (the length selected with the LOOP START and LENGTH parameters)
are deleted.