Playing Back Samples (SAMPLE MODE)
14
Playing Back Only While a Pad is Pressed (GATE)
This switches the gate function on/off.
When the [GATE] button is on, samples play back only while the pads are pressed (gate playback).
When the [GATE] button is off, samples begin playing back each time a pad is pressed.
You can also use the gate function with the [EXT SOURCE] button.
● When the [GATE] button is turned on, the sound from the external device is output only while you are pressing the [EXT
SOURCE] button.
● When the [GATE] button is turned off, the sound from the external device is switched on/off each time you press the [EXT
1.
Press the [GATE] button to switch the function on (the button is lit) and off (the button goes dark).
To turn the GATE parameter on/off for all samples in a bank, press the [GATE] button while holding down the [SHIFT] button.
Momentary gate control
Use the operations shown below to change how samples are played back.
Stop the playback of samples whose GATE is off
Hold down the [EXIT] button and press pads [1]–[16].
Continue the playback of samples whose GATE is on
Press the [HOLD] button while holding down pads [1]–[16].
Hold down the [HOLD] button and press pads [1]–[16].
To Next Page
Loading...
