Playing Back Samples (SAMPLE MODE)
19
Setting a Fixed Sample Volume (FIXED VELOCITY)
You can set the sample’s velocity so that it always plays back at 127 (the maximum).
1.
Hold down the [SHIFT] button and press the pad [1].
“FIXED VELOCITY ON” is shown. The sample velocity is fixed at 127.
2.
To cancel this setting, hold down the [SHIFT] button again and press pad [1].
“FIXED VELOCITY OFF” is shown. The velocity changes (goes back to the original setting) according to how hard you play the
pads.
The FIXED VELOCITY setting can be set for each sample.
For details, refer to “Changing the Pitch or Playback Speed of a Sample (PITCH/SPEED)(P.50)”.
To Next Page
Loading...
