Roland SP-404MK2 - Pad and Effect Settings

Configuring the Various Settings (UTILITY)
92
Configuring the Pad-related Settings (PAD SETTING)
The pad setting screen lets you configure various pad-related settings.
1. Hold down the [SHIFT] button and press the pad [13].
The UTILITY MENU screen appears.
2. Use the [VALUE] knob to select “PAD SET”, and press the [VALUE] knob.
The pad setting screen appears.
From the top screen, you can also make this screen appear by pressing pad [15] while holding down the [SHIFT] button.
3. Turn the [CTRL 3] knob to select a tab.
The PAD SETTING screen is divided into four tabs (groups). Select the tab of the group that contains the parameter you want
to edit.
4. Use the [VALUE] knob to move the cursor to the parameter you wish to edit, and press the [VALUE]
knob.
The value display is highlighted, and you can now edit the value.
For details on the parameters, refer to “PAD SET(P.110)” in the Parameter Guide.
5. Turn the [VALUE] knob to edit the value, and press the [VALUE] knob.
6. Press the [EXIT] button to return to the UTILITY MENU screen.