Editing a Sample (SAMPLE EDIT)
48
Sets the fade-out time. When you set this to 127, the fade-out time is three seconds.
When you change the following parameters while holding down the [COPY] button, you can change the parameters of other
samples registered to the same mute group simultaneously.
● ATTACK
● HOLD
● RELEASE
● BPM SYNC
● GATE
● LOOP
● REVERSE
For details on the mute group setting, refer to “Preventing Samples from Playing Back at the Same Time (MUTE GROUP)(P.24)”.
Example settings for ATTACK, HOLD and RELEASE
Here are some examples of how the volume of a six-second sample changes when you set different ATTACK, HOLD and RELEASE
values.
To Next Page
Loading...
