21
RootWave Pro User Guide
• The Treatment Return Blade might be sharp or burred, grip with
care.
• The Treatment Return Blade could, if dropped, both damage the
integrity of dielectric insulating boots and injure your foot. Hold
and carry it with care.
• The Electrode Module, Safety Earth and Treatment Return have
features with pointed ends and sharp edges. Handle them
carefully and ensure they are secured in a position that cannot
damage other equipment during transportation.
• Electrical current can flow between plants that are in contact with
each other. To avoid damage to adjacent plants from the target
weeds you may need to cut plants back before commencing
treatment.
• Generator exhaust may be hot. Ensure generator exhaust is
pointing away from other equipment.
• Treating weeds close to water can be harmful to aquatic life.
Ensure potential impact to aquatic life has been considered
before treatment.
• Strong magnetic fields created by arcs can interfere with the
function of adjacent sensitive electronic equipment. If adjacent
equipment appears to function incorrectly then stop treatment
and either turn off or relocate sensitive equipment or stop
treatment in that area.
Operation
To prevent damage to equipment
• Treating too close to cables can cause interference in cables
which can corrupt signals or prevent receiving equipment from
working properly. Do not treat within 1 metre of sheathed or
insulated cables above, on or under the ground.
To Next Page
Loading...