20
RootWave Pro User Guide
After use
To avoid death or serious injury from electric shock:
• To avoid risk of electric shock turn the power isolator switch on
the Power Module to ‘Off’ and turn off the generator before
disassembling the system.
• Water and condensation can conduct electricity. Store RootWave
Pro in a dry location, for example inside a vehicle or building. Do
not store RootWave Pro in wet, humid, condensing or foggy
conditions.
Caution
• Indicates a hazardous situation which, if not avoided,
could result in moderate injury, damage the product,
or lead to loss of data.
Set-up
To avoid moderate injury or damage to property:
• The Treatment Return Blade and Safety Earth spikes must be fully
inserted into the ground for safe and effective operation. It may
be necessary to try more than one position before full insertion
can be achieved in dry, hard or rocky ground. Press the Safety
Earth into the ground with your foot. Do not stamp on the Safety
Earth or Treatment Return body, or attempt to force them into
the ground with a hammer or other object.
• The Treatment Return Blade is designed to be driven into the
ground with the Rubber Mallet provided. Do not use a metal
hammer as this may damage the interface at the top of the blade
(including the thread) and prevent it from being assembled
correctly.
• Exercise caution when driving the Treatment Return Blade into
the ground with the Rubber Mallet - ensure your other hand is
clear of the top to avoid accidental strikes with the mallet.
To Next Page
Loading...