10
RootWave Pro User Guide
General
To avoid death or serious injury from electric shock:
• RootWave Pro uses hazardous high voltages to kill weeds and if
used incorrectly can cause death to humans or animals. Training
course and exam must be completed by all operators before using
RootWave Pro. For training courses including refresher training
please contact your RootWave Pro supplier.
• Safety interlocks are in place to ensure correct set up and safe
operation. Modifications to RootWave Pro may result in
unexpected compromise to safety features. Do not attempt to
modify the system, use non-genuine RootWave accessories or
overcome safety features as this can lead to electric shock.
• RootWave Pro can only be serviced by trained and authorised
service personnel. Contact your RootWave Pro supplier for
servicing or replacements.
• Disconnect all power sources before attempting any disassembly
for recycling. Partial disassembly will render RootWave Pro
unsafe for future use.
• The Treatment Lance electrode is at a hazardous voltage when
activated. The live electrode warning light located on the shaft of
the Treatment Lance lights up in red when the high voltage
output is activated, indicating the presence of hazardous voltages.
This is true whether the Electrode Module is fitted or not. Before
attempting to handle the electrode, turn the power isolator
switch on the Power Module to ‘Off’ and turn off the generator
and check the live electrode warning light is off.
• Water and condensation can conduct electricity. Never place the
Treatment Lance or Electrode Module on damp or wet ground.
Place Treatment Lance and Electrode Module in an elevated, dry
location to avoid water ingress.
To Next Page
Loading...