RootWave Pro PRO-001-3 - Treatment Return or Safety Earth Has Been Exposed to Mud or Water

72
RootWave Pro User Guide
Treatment Return or Safety Earth has been exposed to
mud or water
Cause
Solution
Treatment Return or Safety
Earth has been exposed to
mud or water.
1. Turn off and disconnect
system.
2. Remove excess mud with a
cloth or synthetic brush.
3. Check base can move freely
when pushed approximately
10mm into the body against
moderate internal spring force.
4. Connect up the system, turn on
generator output and power
module power isolator switch,
check ‘Ready’ light comes on.
If ‘Ready’ light does not come on,
then contact your RootWave Pro
supplier.