RootWave Pro PRO-001-3 - Table 1 Rootwave Pro Components; Power Module TRA-001-3 or TRA-002-3

24
RootWave Pro User Guide
Table 1 RootWave Pro components
1
Electrode
Module
ETD-001-3
Fitted to the Treatment Lance, makes contact
with the weed to deliver the electrical energy.
2
Treatment
Lance
APL-001-3
The operator holds the treatment lance when
treating weeds.
It provides the controls that the operator needs
at their fingertips to set voltage, reset, activate
and safe stop the output.
It allows the operator to apply the energy from
a safe distance.
3
Lanyard
Helps support the Treatment Lance during
prolonged use.
4
Treatment
Return
GRW-001-3
Provides a return path for the electricity.
Return blade is inserted into the ground with
the mallet before the body is screwed on.
Extraction handle also provided.
RootWave Pro cannot activate unless this is
inserted into the ground.
5
Short
Treatment
Cable
CAB-002-3
Connects the Power Module to the Treatment
Return.
7m long
 See page 51 for more information
6
Long
Treatment
Cable
CAB-001-3
Connects the Treatment Return to the
Treatment Lance.
20m long, belt loop provided.
7
Power Module
TRA-001-3 or
TRA-002-3
Creates high-voltage electricity and contains
safety and control systems.