64
RootWave Pro User Guide
Transportation and storage
If you are transporting RootWave Pro, secure all components in the
vehicle, ensuring they are kept dry during transport.
Store all components of RootWave Pro in a clean, dry, and secure
location.
For more information, see ‘Specifications’ on page 74.
Training
For training courses including refresher training please contact your
RootWave Pro supplier.
For contact information, see section ‘Contact details’ on page 3.
Changing the fuse
The fuses are mounted on the control panel of the Power Module.
Before attempting to access the fuse, turn the power isolator
switch on the Power Module to ‘Off’ and turn off the generator.
Once all power is off, to change the fuse, unscrew the fuse cap and
withdraw the sleeve from the control panel, replace the fuse and
screw the sleeve back into the control panel.
If you experience repeated blown fuses then contact your RootWave
Pro supplier.
For more information, see:
’Power Module’ on page 26
To Next Page
Loading...