37
RootWave Pro User Guide
Additional equipment
The equipment below is needed and not provided with RootWave
Pro:
Table 8 Additional equipment needed
Provides power to the Power Module.
RootWave Pro requires a generator capable
of producing 230 V single-phase between
50-60 Hz and a power output of between
7.5 kVA and 10 kVA.
Dielectric insulating
boots
To protect against electric shock from
Treatment Lance.
Must be capable of withstanding 15 kV
(peak) at 50 Hz. Must be at least 35cm tall.
Boots should be retested annually.
A rainproof cover such as a tarpaulin can be
used as a temporary measure to protect the
equipment from rain during transportation
if adequately fitted.
To secure equipment to vehicle during
transit.
For loading Power Module onto vehicle as it
weighs 105 Kg.
Fire suppressant
equipment
As a precaution when using RootWave Pro
in very dry conditions.
To wipe down the distal end of the lance to
prevent carbon build up.
For wiping down components after use.
To clean the electrode tip.
To Next Page
Loading...