RootWave Pro PRO-001-3 - Table 9 Additional Equipment that May be Needed

38
RootWave Pro User Guide
Equipment
Purpose
Spade
May help to remove Treatment Return
blade from ground in some conditions.
Metal file
To sharpen the Treatment Return Blade
should it become blunt or burred.
3mm hex key
For fitting Electrode Module to Treatment
Lance
The equipment below may be needed depending on local working
practices and procedures, risk assessment, the operating
environment and the weeds being treated.
Table 9 Additional equipment that may be needed
Equipment
Purpose
Cutters and rake
For cutting down weeds and raking them to
one side.
CAT (Cable
Avoidance Tool)
and signal
generator
To identify subterranean hazards.
Barriers and signs
For cordoning off treatment area from
bystanders, walkers, dogs or other animals.
Safety equipment
as required
For operating on loose, steep or uneven
ground.
Mobile phone with
alarm / timer and
GPS location
To support lone working.
Other PPE
As required by local working practices and
procedures and risk assessment.