63
RootWave Pro User Guide
16. Clean and check
After use wipe clean with a dry cloth all
components of the RootWave Pro
system before storing.
Wipe down the Electrode Module with
an alcohol wipe to prevent the build-up
of carbon on the body and around the
electrode.
Ensure the thread in the Treatment
Return blade is clear of debris.
Replace the dust caps on all connectors and coil the cables.
While cleaning, check all components for signs of damage or wear
and tear, including cables and connectors and Electrode Module. If a
component is damaged or showing signs of wear contact your
RootWave Pro supplier.
For contact information, see section ‘Contact details’ on page 3.
• Build-up of debris on the electrode tip can reduce
the treatment effect. The tip of the electrode can be
cleaned with a mild abrasive material such as emery
cloth or wire wool.
To Next Page
Loading...