Rosemount 2700 - Page 20

4-2
MODEL 2700 SECTION 4.0
CONFIGURATION
TABLE 4-1.
Factory And User Settings, continued
ITEMS CHOICES RANGE DEFAULT USER SETTING
Current/Voltage #1
Sensor address Any Sensor 1 - 8 Address #1 _______________
Output Type (Sec. 4.6) Current/Voltage Current** _______________
Output Range (Sec. 4.6) 0/4-20m/A** 4-20mA** _______________
0/4mA 0µS/cm _______________
0/20mA 10µS/cm
Auto Range (Sec. 4.6) On/Off Off _______________
Current #2
Sensor address # Any Sensor 1 - 8 Address #1 _______________
Output Type (Sec. 4.6) Current only Current _______________
Output Range (Sec. 4.6) 0/4-20m/A 4-20mA _______________
0/4mA (Sec. 4.6) 0µS/cm _______________
0/20mA (Sec. 4.6) 10µS/cm
Conductivity - K=1.0
Alarm 1 (Sec. 4.5) Any Sensor 1 - 8 At address #1 _______________
Alarm Point (Sec. 4.5) 10 mS/cm _______________
Deadband Point (Sec. 4.5) 9 mS/cm _______________
Alarm 2 (Sec. 4.5) Any Sensor 1 - 8 Address #1 _______________
Alarm Point (Sec. 4.5) 1 mS/cm _______________
Deadband Point (Sec. 4.5) 2 mS/cm _______________
Current/Voltage #1
Sensor address Any Sensor 1 - 8 Address #1 _______________
Output Type (Sec. 4.6) Current/Voltage Current** _______________
Output Range (Sec. 4.6) 0/4-20m/A** 4-20mA** _______________
0/4mA 0mS/cm _______________
0/20mA 10mS/cm
Auto Range (Sec. 4.6) On/Off Off _______________
Current #2
Sensor address # Any Sensor 1 - 8 Address #1 _______________
Output Type (Sec. 4.6) Current only Current _______________
Output Range (Sec. 4.6) 0/4-20m/A 4-20mA _______________
0/4mA (Sec. 4.6) 0mS/cm _______________
0/20mA (Sec. 4.6) 10mS/cm
Conductivity 4 Electrode K=.85
Alarm 1 (Sec. 4.5) Any Sensor 1 - 8 Address #1 _______________
Alarm Point (Sec. 4.5) 10 CONC _______________
Deadband point (Sec. 4.5) 9% CONC _______________
Alarm 2 (Sec. 4.5) Any Sensor 1 - 8 Address #1 _______________
Alarm point (Sec. 4.5) 1% CONC _______________
Deadband Point (Sec. 4.5) 2% CONC _______________
Current / Voltage #1
Sensor address # Any Sensor 1 - 8 Address #1 _______________
Output Type (Sec. 4.6) Current/Voltage Current** _______________
Output range (Sec. 4.6) 0/4-20mA** 4-20mA** _______________
0/4mA 0% CONC _______________
20 mA 10% CONC _______________
Auto Range (Sec. 4.6) On/Off Off _______________
Table 4-1 is continued on page 4-3