Rotax 125 MAX DD2 evo User Manual

BRP-Rotax
Operators Manual
MAINTENANCE SCHEDULE FOR ENGINE COMPONENTS
ATTENTION
Non-compliance with the specified maintenance schedule could result in engine
damage.
FREQUENCY NOTES
ENGINE Before
every
opera-
tion
After
every
opera-
tion
Every
2
hours
of op-
era-
tion
Every
5
hours
of op-
era-
tion
Every
10
hours
of op-
eration
Every
50
hours
of op-
era-
tion
Check oil level in
gearbox
X
Exchange oil in gearbox
after first 5 hours of op-
eration, then inspect
the oil every 5 hours
and change it if
necessary
Clean exhaust valve and
check if moving freely
X
Check overflow bottle,
empty if needed
X
Tear-down inspection of
engine (must be con-
ducted by an authorized
ROTAX® Service
Center)
X
Inspect following com-
ponents and replace if
requested: piston, pis-
ton pin and piston pin
bearing, conrod and
conrod bearing, main
bearings of crankshaft.
Clean airfilter, apply oil,
replace in case of visible
damage
X
after each rainy ses-
sion, use air filter
cleaner kit
Visually inspect connec-
tions between engine
and carburetor and check
fit and tightness of intake
silencer
X
right after every
collision
Visually inspect fuel filter
regarding dirt, replace if
needed
X
Replace fuel filter
X
Effectivity: 125 MAX DD2 evo
4
Page 9
Edition: September 01 2019

Rotax 125 MAX DD2 evo Specifications

General

Brand	Rotax
Model	125 MAX DD2 evo
Category	Engine
Language	English