BRP-Rotax
Operators Manual
CENTRIFUGAL CLUTCH
The engine is equipped with a centrifugal clutch operating in an oil bath. This clutch sepa-
rates the engine from the gearbox at less than 2.500 rpm. Only at an engine speed of ap-
prox. 4.000 rpm. the centrifugal clutch is completely engaged.
________________________________________________________________
OVERLOAD CLUTCH
The engine has a mechanical overload clutch, which is installed on the rear axle. It is to
protect the crankshaft from hard shocks from the drive components which are not usual
during normal operation (e.g. the blocking of the rear axle).
Effectivity: 125 MAX DD2 evo
1
Page 5
Edition: September 01 2019
To Next Page
Loading...
