Rotax 125 MAX DD2 evo User Manual

BRP-Rotax
Operators Manual
Step
Procedure
5
Unplug power supply to battery charging unit.
6
Remove output wires of the battery charger from the battery.
7
The battery is ready again for use.
ATTENTION
In addition to these directives, follow the advice of the battery charging unit
manufacturer.
NOTE
When the battery is charged while not mounted on the kart, use the connector ca-
ble (part no. 266022). If needed, contact your authorized distributor or one of their
ROTAX® Service Centers.
The charging condition of the battery can be estimated by using a commercially available
measuring instrument.
______________________________________________________
Effectivity: 125 MAX DD2 evo
2
Page 5
Edition: September 01 2019

Rotax 125 MAX DD2 evo Specifications

General

Brand	Rotax
Model	125 MAX DD2 evo
Category	Engine
Language	English