BRP-Rotax
Operators Manual
Additional Information
• In case values are being entered manually, the provided numbers will turn from white to
red if they are considered to be unrealistic.
• Depending on their preference, users can decide if they would like to use the metric or
the imperial system. You can change between Celsius and Fahrenheit by simply clicking
on the small °C or °F next to the value for temperature. The same works with feet and
meter, where you can just click on the small m or ft located next to the value for altitude
in order to change between the systems.
Figure 3.6
• In the top right corner, you can find a button called “INFO”. By clicking this button, addi-
tional information about the app as well as setting up the carburetor like float height, po-
sition of the jet needle or the air adjustment screw can be found. By clicking the small
red X underneath the info button, you can return to the home screen.
3
Page 8
Edition: September 01 2019
Effectivity: 125 MAX DD2 evo
To Next Page
Loading...
Need help?
General
