Platinum Plus
39
Precision Mode Programming Steps
c) Transitional Tunnel
d) Incoming Air (Outside)
temperature for low/high
pressure.
e) Emergency Pressure
Delay
f) Curtain Position in
Emergency
g) Minimum Level limits
for cross ventilation and
tunnel ventilation.
h) Time to produce
pressure.
all air sources open.
Restore normal
operation using
Management,
Alarm Reset Menu.
1.11
Control |
Control Mode
Choose house operating modes,
temperature curves on or off, and
minimum/maximum level control
mode.
Review Precision Mode Example below,
then Continue with Shared Menus on Page 57
To Next Page
Loading...
