2015-2017 5.0L Mustang Phase 1/2 RHD ROUSHcharger Kit
SECTION B – MODIFICATIONS
1316-RHD-AA 12152016 48 800.59.ROUSH
6. Unpack the eight (8) provided spark plugs (BL3E-
12405) which are pre-gapped to 0.9 mm. Check
to ensure the gap is intact and none are damaged.
7. Install the new spark plugs using a 5/8" spark
plug socket and 6" extension. Torque to 14 Nm.
8. Apply a small amount of dielectric grease to the
inside of the coil on plug boots before attaching to
the spark plugs. Install the ignition coil on plugs in
their original position. Install the coil on plug bolts
and torque to 6 Nm.
9. Connect the electrical connectors for each ignition
coil in eight (8) places.
10. Re-install the coil on plug covers. Reinstall the oil
cap after the RH cover is installed.
To Next Page
Loading...