2015-2017 5.0L Mustang Phase 1/2 RHD ROUSHcharger Kit
SECTION D – INSTALLATION
1316-RHD-AA 12152016 74 800.59.ROUSH
8. Ensure that all intercooler hoses, the degas hose
and all clamps and wiring have been installed to
provide maximum clearance to the supercharger
belt.
AIR INDUCTION SYSTEM
1. Remove the old MAF wire harness clip christmas
tree that retained the harness to the body.
2. Install the dirty air duct (1315-9F763) at the LH
side of the radiator.
3. Lower the airbox assembly into mounting
position. Align the airbox assembly opening with
the dirty air duct and press it into the dirty air tube
until properly installed. A snap will be heard when
properly seated.
4. Secure the airbox using the M6 bolt from the
original airbox and torque to 10 Nm.
To Next Page
Loading...