2015-2017 5.0L Mustang Phase 1/2 RHD ROUSHcharger Kit
SECTION D – INSTALLATION
1316-RHD-AA 12152016 75 800.59.ROUSH
5. Install the clean air tube (1315-9R504) in the
vehicle using two (2) hose clamps (R07130015)
from Hardware Kit A (1315-TVSHKA). Torque
clamps to 3 Nm.
6. Install the PCV fresh air inlet tube (1315-6758) by
connecting the 90-degree tting to the driver side
cam cover and angled tting to the PCV tting in
the clean air tube.
7. Route the MAF wire harness around the airbox
assembly and connect the harness to the MAF
sensor. Make sure the red lock is engaged on the
connector.
To Next Page
Loading...