2015-2017 5.0L Mustang Phase 1/2 RHD ROUSHcharger Kit
SECTION C – SUBASSEMBLY
1316-RHD-AA 12152016 49 800.59.ROUSH
SECTION C – SUBASSEMBLY
INTERCOOLER LOW TEMPERATURE
RADIATOR (LTR)
1. Insert one (1) rubber grommet (R07060107) found
in Hardware Kit H (1315-TVSHKH) into each
lower tab on the low temperature radiator (LTR)
assembly (1315-8K229).
2. Push one (1) sleeve (R07060108) found in
Hardware Kit H (1315-TVSHKH) into each of the
rubber grommets.
INTAKE MANIFOLD BUILDUP
1. Remove the PCV purge hose (13116K817) from
the packaging. Release the clamp and separate
the rubber section of hose as shown.
2. Attach the rubber hose section from the PCV
purge hose to the bubbler tting (3/8" barb) on the
bottom rear of the intake manifold (1315-9H487)
and secure it with the supplied clamp.
SUPERCHARGER BUILDUP
1. Remove the two (2) bolts and the evaporative
emission canister purge valve from the stock
intake manifold (8 mm socket). Discard the bolts.
2. Install the valve into the rear of the supercharger
(1315-6F066) using two (2) M6 x 1.0 x 35.5
mm bolts (N808429) found in Hardware Kit B
(1315-TVSHKB). Torque bolts to 8-12 Nm.
To Next Page
Loading...