2015-2017 5.0L Mustang Phase 1/2 RHD ROUSHcharger Kit
SECTION D – INSTALLATION
1316-RHD-AA 12152016 71 800.59.ROUSH
2. Connect the fan electrical connector.
Fan electrical connector
3. Ensure that the clip (20860) installed during the
electric fan modi cation is in place at the bottom
of the intercooler degas bottle (1315-8D080).
4. Install the intercooler pump inlet hose (1315-
8D029) to the bottom of the intercooler degas
bottle and secure it with the clamp (CT19X12).
Intercooler pump inlet hose (1315-8D029)
5. Install the intercooler degas bottle with intercooler
degas bottle cap (9C3Z-8101) onto the fan shroud
J-clips. Push the bottle into position. The clip
on the bottom should retain the degas bottle in
place.
6. Install two (2) M6 x 1.0 x 22 mm mounting
bolts (N605891) found in Hardware Kit H
(1315-TVSHKH) and torque to 10 Nm.
To Next Page
Loading...