Web-based Configuration Guide Wi-Fi Network Settings
80
Action column. The following content only describes configurations related to wireless authentication. For
details about other SSID configuration parameters, see the Ruijie Cloud Cookbook.
(3) Enable Auth (disabled by default) and configure authentication-related parameters. After the configuration,
click OK to save the configurations.
Note
When Encryption Mode is set to a value other than WPA2-Enterprise(802.1x), Auth is available and you can
select whether to perform wireless authentication.
Mode: Set it to Captive Portal.
Seamless Online: Determine whether to enable Seamless Online as required, which is enabled by default.
After Seamless Online is enabled, users do not need to be authenticated when they go online again in the
specified period of time.
Select or add a new portal: Select a portal template with the authentication mode set to Voucher. If the
configured template does not meet the requirements, click or add a new portal to create a portal template.
(4) Click Save for the configuration to take effect.
To Next Page
Loading...
