English
2
18
2INFORMATION ABOUT THE APPLIANCE
2
2.1Information for the Maintenance Technician
2
Theappliancemustbeinstalledinawell-lit,
shelteredanddryplaceandonatable
suitable to bear its weight.
22
Toensureitscorrectoperationandreliabilityovertime,complywiththefollowing
recommendations:
2
•
ambient temperature: from +2°C to +32°C;
2
•
maximum humidity allowed: 80% (non-condensed).
22
Forspecialinstallations,notcoveredbythismanual,pleasecontactthedealeror
the local importer. If this is not possible, please contact the Manufacturer.
22
Thetechnicalserviceisavailableforanyexplanationorinformationregardingthe
correctoperationofthemachineandtosatisfyanyrequestforsparepartssupply
or technical assistance.
22
TheMaintenanceTechnicianmustcarefullyreadandobservethesafetywarnings
containedinthismanualtoensurethatinstallation,start-up,useandmaintenance
operations are performed in complete safety.
22
TheMaintenanceTechnicianisresponsibleforkeepingorgivingthekeystoaccess
internal partsofthemachine toanotheroperator(Supply operator),andis thesole
responsible for any servicing procedure.
22
Thismanualisanessentialpartsuppliedwiththemachineandshouldalwaysbe
available for reference before any operation on the machine.
22
2.2Description and Intended Use
2
This machine is automatically used to brew:
2
•
coffee and espresso coffee using instantly ground coffee beans;
2
•
hot water to prepare beverages;
2
•
milk-based beverages using the Cappuccinatore supplied. (*only versions M).
2
Theelegantmachinehousinghasbeendesignedforuseinsmalloffices,businesses
and institutions.
2
Using the machine for any other purpose is considered dangerous and as a misuse.
22
Misuse voids all formsof warranty, releasing
theManufacturerfromanyresponsibility
fordamagetopropertyand/orpersonal
injury.
2
The following are also considered misuse:
2
•
anyuseotherthantheintendeduseand/oremployingmethodsotherthanthose
described in this manual;
2
•
any operation on the machine in breach of the instructions provided in this manual;
2
•
anytamperingwithpartsand/orsafetydevicesnotpreviouslyauthorisedbythe
Manufacturer and performed by unauthorised personnel;
2
•
machine installation in an outdoor environment.
22
In such cases the customer will be charged with the machine repair cost.
22
2.3Appliance Identification
2
Theapplianceisidentifiedbythemodelnameandserialnumbershownonthe
special plate.
2222222
1Name of the Manufacturer
2Supply voltage (V)
3Water mains pressure
4Marks of conformity
5Certifying organization
6appliance code.
7Model
8Supply frequency (Hz)
9Electrical power consumption (W)
10Serial number
11Year and month of manufacture
12Country of manufacture
222
Itisstrictlyforbiddentotamperwithor
modify the data plate.
2
Whencontactingthetechnicalservice,
alwaysrefertothisplatebyindicatingthe
technical data shown on it.
22
To Next Page
Loading...
