English
7
33
Removethescrewpreventingaccidentalopeningoftheservicecompartmentflap.
(* 120V USA version only).
7
Open the service compartment door and turn the lever by only one notch.
7777
Closethedooragainandbrew1-2cupsofcoffeetoverifythechangesinthe
grinding degree. Repeat the procedure until you reach the desired grind setting.
7
Re-insertthescrewpreventingaccidentalopeningoftheservicecompartmentflap.
(* 120V USA version only).
7
Thereferencemarksindicatethegrindsetting.Therearedifferentgrindsettingsto
choose from with the following references:
7
1 - Fine grind
7
2 - Coarse grind
77777
7.9
Adjusting the "Aroma" - Amount of Ground Coffee
7
Themachinemakesitpossibletoregulatethequantityofcoffeebeinggroundfor
thepreparationofeverysinglecoffee-basedbeverage.Theregulationmustbedone
byaccessingtoprogrammingmenuofthemachine.Modifyingthequantityofcoffee
ground inthe recipesofthe beverages.Thereference marksindicatethe amountof
ground coffee which has been set.
7
Differentquantitiesofgroundcoffeecanbesetforeveryrecipewiththefollowing
references:
7
1 - Minimum coffee quantity
7
4 - Maximum coffee quantity
7777
TheamountofcoffeethatisgroundcanbefurtheradjustedviatheAroma
adjustment lever.
7
Thisoperationmayonlybecarriedoutby
specialised technical personnel.
7
TheAromaadjustinglevermustonlybe
turnedwhenthecoffeegrinderisstopped.
Theadjustmentmustbeperformed
before brewing coffee.
7
DONOTchangethecoffeedoseifthe
pre-grinding option is active (set on "ON").
7
Theadjustmentcanbedoneusingtheleverlocatedonthesideintheservice
compartment of the machine. Remove the drip tray.
77777
Removethescrewpreventingaccidentalopeningoftheservicecompartmentflap.
(* 120V USA version only).
7
Open the service compartment door.
77777
The reference marks indicate the amount of ground coffee which has been set.
7
A - Minimum coffee quantity
7
B - Maximum coffee quantity
77777
The following figure shows the default setting of the position of the adjusting lever.
777777