Saeco MAGIC M2 - Washing the Parts Coming into Contact with Food; Using the Appliance

English
7
35
They have to be performed:
7
•
at first start-up;
7
•
when the machine remains inactive for a long time (more than 2 weeks).
777
Ifthemachinefailsitsfirststart-up
(brewing)make2furtherattempts.Atthe
endofthese3attempts,iftheproblemis
notsolved,letthemachinerestfor30
minutesandthentryagainwith3
brewings.Iftheproblempersists,please
contact Customer Service.
77
7.13.1After a Period of Inactivity
7
Empty the water tank, wash and rinse it.
7
Iftheapplianceisconnectedandsettothe
watermains,thisoperationmustbe
carried out with the machine switched off.
7
Fillthewatertank.(Onlyiftheapplianceisnotconnectedorsettothewater
mains).
7
Place a large container under the dispensing spout.
77777
Presstheiconofacoffeebeveragetostartdispensing.Themachinestartsbrewing
coffeefromthedispensingspout.Waituntilbrewinghasbeencompletedand
empty the container. Repeat the brewing process 3 times.
77
Place a large container under the dispensing spout.
77777
Pressthe"HotWater"beverageicontostartdispensingHOTWATER.Whenthe
hot water dispensing procedure has been completed, empty the container.
7
The machine is now ready for use.
77
7.14 Washing the Parts coming into Contact with Food
7
Rinse all the parts coming into contact with food.
77
•
Thoroughly wash your hands.
7
•
Prepareachlorine-based,antibacterialdisinfectingsolution(theproductscanbe
purchased at the chemist's) following the concentrations indicated on the product.
7
•
Remove all the covers and all the containers from the appliance.
7
•
Immerse all these parts in the previously prepared solution.
77
7.15Using the Appliance
7
Beforeusingthemachine,readthismanual
carefullyandmakesureusersarefamiliar
with the machine.
77
Afterthemachinehasnotbeenusedfora
certaintime,itisrecommendedtoread
section"FirstUse-UseafteraLong
PeriodofInactivity"again,beforeusingthe
module again.
77
The beverage selection modes are indicated in chapter "Operation and Use".
7