English
5
26
Beforeconnectingtheappliancetothe
watermains,pleasereadandfollowthe
applicableregulationsinforceinyour
country.
55
Remove the cap from the coupling on the appliance rear part.
5555
Connect the water network hose to the appliance's 3/4" threaded coupling.
5555
Thewatermainshoseistobecertified
according to the IEC 61770 standard.
555
Screw the supply hose to a cold water knob with a 3/4 gas threaded spout.
5555555
Ensurethatthehoseisfreeofkinksand
twists.
5555
Open the water knob.
5555
Twolitresofwatermustbepouredinto
thewatertankforthefirstfillingofthe
machine'shydrauliccircuit.Thisoperation
mustbecarriedoutwiththemachine
switchedoff,beforeitisswitchedonfor
the first time.
55
Removetheprotectioncoverasdescribedinsection"OpeningtheUpperLid".
Removethelidfromthewatertank.Removethetank;liftitusingtheinside
handles. Rinse the water tank and pour in 2 litres of water.
55555
Insert the water tankback into itsseat and refitthe lid. Connect themachine to the
electric mainsasexplainedinthesection "Connectingtotheelectricmains".Switch
themachineonbyturningthemainswitchattherearofthemachinetoposition
"I".
55
Wait for the hydraulic circuit to load.
55
Access the programming menu by pressing the "settings" icon.
5555
To Next Page
Loading...
