Saeco MAGIC M2 - Page 54

English
10
54
Confirmtheprocess.Themachinesummarizesonthedisplayallthephasestobe
performed for the washing step-by-step. For example, the phases are the following:
1010
Fillthewatertank.(Onlyiftheapplianceisnotconnectedorsettothewater
mains).
10
Pourasachetofsolutionintoacontainerwith1/2(half)litreoffreshdrinking
water.
10101010
Insert the clean tube directly into the container.
10101010
Position an empty container with a capacity of at least 1 litre under the dispenser.
10101010
Themachinerunsawashingcycleofthecappuccinomakerwithdetergent.Wait
until the cycle stops automatically. The following screen is displayed:
10101010
Donotdrinkthesolutiondispensedduring
thisprocedure.Thesolutionmustbe
disposed of.
1010
Wash the container usedfor the solution thoroughlyand fill itwith 1/2 (half) litreof
fresh drinking water which will be used for rinsing.
10
Insert the suction hose into the container.
10
Empty the container placed under the dispensing spout.
10
Reposition the empty container under the dispenser.
1010
ThemachineperformsaCappuccinatorerinsecycle.Waituntilthecyclestops
automatically. The machine will return to the "Washing/rinsing" menu.
1010
Remove the containers.
1010
10.2.6Thorough cleaning of the Cappuccino maker
dispensing nozzles
10
(*only versions M).
1010
Every48hoursdisassemblethedispensingnozzlesofthecappuccinomakerand
thoroughly clean them.
10
Failure to clean can compromise the correct operation of the machine.
1010
Belowpleasefindhowtodisassembleand
wash the nozzles.
1010
Remove the aesthetic cover.
10101010
Remove the two dispensing nozzles as shown in the figure.
1010101010
Washthenozzlesunderrunningwaterpressingthemlightly.Makesureanymilk
deposits/residuesareremoved.Afterwashing,reassemblethepartsfollowingthe
same procedure used for disassembly, but in reverse order.
101010
10.2.7Thorough cleaning of Cappuccino maker -
complete disassembly
10
(*only versions M).
1010
Completelydisassemblethecappuccinomakerweeklytothoroughlycleanallthe
components.
10
Failure to clean can compromise the correct operation of the machine.
1010