34 • Getting Started Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU
4. Close the paper lever and press the PAPER FEED key until the paper comes out.
5. Passing the leading edge of the paper through the cutter slot. Tear off the excess paper.
Replace the printer cover.
※ If you wish to use the printer to print a sales journal, insert the paper into the paper take-up
spool. Wind the paper two or three turns around the spool shaft and install the spool in the
mount.
※ ER-420M is possible to feed automatically when you rock the paper levers and insert paper.
To Next Page
Loading...
