12 • Quick Setup ER-350 Electronic Cash Register V2.1
Basic Programming
This section covers the basic programming necessary to get your cash register running quickly. See
“Advanced Programming” on page 45 for if you wish to program options that are not included in this
section.
Setting the Date
The date sequence is Month-Day-Year.
1. Turn the control lock to the PGM position.
2. Enter the date in the format you have selected and press the SUBTOTAL key:
M M D D
@/
FOR
Y Y
Date Setting Example
If the date is March 1, 1999, enter:
0 3 0 1
@/
FOR
9 6
The date you have entered will display and print on the printer:
03-01-1999
Setting the Time
1. Turn the control lock to the PGM position.
2. Enter the hour and minute in military time (24 hour time) and press the @/FOR key:
H H
@/
FOR
M M
Time Setting Example
If the time is 3:25 PM, enter:
1 5 2 5
@/
FOR
The time you have entered will display and print on the printer:
15:25
To Next Page
Loading...
Need help?
General
