Sam4s ER-350 - +% and -% Key Programming

52 • Advanced Programming Instructions ER-350 Electronic Cash Register V2.1
System Option Table
NOTE: Shaded areas are the default settings, in other words, the shaded area
indicates the way the register is automatically set up.
Option
No.
SYSTEM OPTION STATUS
1
Print the grand total on X,/Z report. YES = 0
NO = 1
2
Print the gross total on X,/Z report. YES = 0
NO = 1
3
Reset the consecutive number counter after a Z report. NO = 0
YES = 1
4
Reset the Z counter after Z report. NO = 0
YES = 1
5
Skip totals with zero value on X,Z report. YES = 0
NO = 1
6
Reset the grand total after a Z report. NO = 0
YES = 1
7
Print the subtotal when pressed. YES = 0
NO = 1
8
Cash must be declared before X/Z report. NO = 0
YES = 1
9
Allow X reports YES = 0
NO = 1
10
Decimal point position 0 = none
1 = 1 place
2 = 2 places
1 = 3 places
11
Select a method for tax printing:
Print Taxable Totals. Print tax amounts separately. 0
Print Taxable Totals. Print only total of all taxes. 1
Print Taxable Totals. Do not print tax amounts. 2
Do not print Taxable Total. Print tax amounts separately. 3
Do not print Taxable Total. Print only total of all taxes. 4
Do not print Taxable Total. Do not print tax amounts. 5