ER-350 Electronic Cash Register V2.1 Advanced Operating Instructions • 43
Receipt On/Off and Receipt on Request
When a receipt is not normally issued, you can turn the receipt function on or off.
If the receipt is off, you can still issue a receipt after the sale has been completed. Normally, this
function is not allowed. If you wish to allow after sale receipts, you must set system option #17 to a
value of 1. See “System Option Programming” on page 50.
To Turn the Receipt Off
♦ With the control lock in the REG position, press PAID OUT:
PAID
OUT
To Turn the Receipt On
♦ With the control lock in the REG position, press PAID OUT again:
PAID
OUT
Printing a Receipt after the Sale
♦ After the sale has been totaled, but before the next transaction is started, press
CASH/TEND:
CASH/
TEND
Note: Because receipt memory is limited, when a sale has more than 30 items
or more than 3 tenders, the receipt after sale can not print all items. A row of
dots is printed indicating the receipt is incomplete.
To Next Page
Loading...
