ER-350 Electronic Cash Register V2.1 Advanced Operating Instructions • 19
Advanced Operating
Instructions
Clerk Operations
If you wish to use the clerk system, you must first activate the clerk system by setting system option
#16. See “System Option Programming” on page 50. You can activate the clerk system for stay
down or pop-up mode.
• Stay down means that once a clerk is signed on, the same clerk will remain signed on
until a different clerk signs on or the original clerk signs off. A stay down clerk system
might be used when only one operator uses the register at a time, and a different
operator begins when a work shift is changed.
• Pop-up means that the clerk is automatically signed off an the end of each transaction.
Therefore, to begin a transaction, you must first sign a clerk on. A pop-up clerk system
might be used in a department store, where several clerks might use the register during
the same shift, and clerk sales information is required.
Clerk Sign On
♦ To sign on, enter the secret code and press the CLERK key, or press the CLERK key,
then enter the secret code and press the CLERK key again.
CLERK
Secret
clerk #
CLERK
Secret
clerk #
CLERK
or
Clerk Sign Off
♦ To sign off, enter 0, press the CLERK key.
CLERK0
To Next Page
Loading...
