ER-350 Electronic Cash Register V2.1 Quick Setup • 15
Programming a Taxable Department
1. Turn the control lock to the PGM position.
2. Complete the tax status table below by adding the status digits for each tax. Then enter
the resulting tax status code.
Taxable by Rate 1? Yes = 1
No = 0
+
Taxable by Rate 2? Yes = 2
No = 0
+
Taxable by Rate 3? Yes = 4
No = 0
+
=
3. Press the @/FOR key.
4. Press the department key you wish to program, or press DEPT SHIFT and the
appropriate department if you are programming departments 9-16.
5. Repeat steps 2, 3 and 4 for each department you wish to program.
6. Press the CASH/TEND key to end programming.
Taxable Department Programming Flowchart
DEPT
SHIFT
Tax
Status
Code
Repeat for each
Department
DEPT
KEY
Use DEPT SHIFT
for depts 9-16
CASH/
TEND
@/
FOR
Taxable Department Programming Example
Set department 1 taxable by tax rate 1:
@/
FOR
1
1/9
Press the CASH/TEND key to end programming.
CASH/
TEND
The tax status you have entered will display and print on the printer:
DEPT.1 T1 0
PROGRAM TERMINATE
01-03-1999 16:36
000014 00
To Next Page
Loading...
Need help?
General
