ER-350 Electronic Cash Register V2.1 Advanced Programming Instructions • 73
Logo Programming Example
Program the first line of the logo to say “GENERAL STORE”
1. Turn the control lock to the PGM position.
2. Press the @/FOR key.
3. To center the message on the receipt, enter six space characters: 7 0 7 0 7 0 7 0 7 0
7 0.
4. Enter the codes representing the text “GENERAL STORE”: 2 6 2 4 3 3 2 4 3 7 2 0 3 1
7 0 3 8 3 9 3 4 3 7 2 4.
5. Press the @/FOR key.
6. Enter 1 1, press the CHECK TEND key.
7. Press the CASH/TEND key to end programming.
To Next Page
Loading...
