Samson Trovis 6493 - Page 19

EB 6493 EN 3-7
Design and principle of operation
Generalspecications
Display Backlit LCD
Display range –999 to +9999; start value, end value and decimal sep-
arator can be adjusted
Conguration Functions saved in read-only memory for xed set point
and follow-up control, one control circuit
Supply voltage 90 to 250VAC; 47 to 63Hz
24VAC/DC (20 to 30VAC/DC), 47 to 63Hz
Power consumption 13VA (90 to 250VAC), external fuse >630mA (slow)
7VA (24VAC/DC), external fuse >1.25A (slow)
Type of connection Screw clamp terminals
Wire cross-section Max. 1.5mm²
Temperature Ambient: 0 to 50°C
Storage and transport: –20 to +70°C
Mechanical environmental conditions af-
fecting storage, transport and operation
Sinusoidal vibration according to IEC60068-2-6:
2 to 9Hz; 3.5mm amplitude
9 to 200Hz; 10m/s² acceleration
200 to 500Hz; 15m/s² acceleration
Random and guidance vibration according to IEC60068-
2-64:
1.0m²/s³; 10 to 200Hz
0.3m²/s³; 200 to 2000Hz
Shocks according to IEC60068-2-27:
Acceleration 100m/s²; duration 11ms
Degree of protection IP65 (front), IP30 (housing), IP00 (terminals) according
to EN60529
Device safety According to EN61010-1:
Class of protection II
Overvoltage category II
Degree of contamination 2
Design and testing according to EN61010-1
Electromagnetic compatibility Requirements according to EN61000-6-2, EN61000-6-
3 and EN61326-1
Cycle time ≤80ms
Weight Approx. 0.5kg
Conformity