Samson Trovis 6493 - AUX Menu, -CO- VIEW: Set Viewing Angle of the Display; I-O Menu: Process Data; CO- CIN: Firmware Version; CO- S-No: Serial Number

9-4 EB 6493 EN
Operation
9.5 AUXmenu,-CO-VIEW:Setviewingangleofthedisplay
The contrast for the top and bottom viewing angle of the display can be changed from Level
1 to Level 10 in the AUX menu.
Î See Conguration Manual uKH6493.
The default setting (Level 6) only needs to be changed in extreme installation situations.
-CO-VIEW Top/bottom viewing angle of display
01VIEW
Level 1
…
06VIEW
Level 6
…
10VIEW
Level 10
9.6 I-Omenu:Processdata
You can read various variables and data in this menu. In addition, you can calibrate zero
and span for the analog inputs IN1 and IN2 as well as the analog output Y.
9.6.1 -CO-CIN:Firmwareversion
Read the rmware version
I-O -CO- CIN Firmware version
9.6.2 -CO-S-No:Serialnumber
Read the serial number
I-O -CO- S-No Serial number
Tip