Samson Trovis 6493 - Notes on Possible Severe Personal Injury

EB 6493 EN 1-3
Safety instructions and measures
Referenced standards, directives and regulations
The TROVIS6493 Compact Controller with a CE marking fullls the requirements of the Di-
rectives 2014/30/EU and 2014/35/EU.
The TROVIS6493 Compact Controller with a EAC marking fullls the requirements of the
Regulations TRCU004/2011 and TRCU020/2011.
The 'Certicates' section contains this declaration of conformity and TR CU certicate.
The controller is designed for use in low voltage installations.
Î For wiring, maintenance and repair, observe the relevant safety regulations.
Referenced documentation
The documentation for the TROVIS6493 Compact Controller consists of the Mounting and
Operating Instructions EB6493 and the Conguration Manual uKH6493.
These mounting and operating instructions EB6493 describe the installation, electrical wiring
and operation of the controller. In addition, EB6493 includes a list of all conguration set-
tings.
The Conguration Manual KH6495-2 uKH6493 describes the controller's functions in de-
tail. The control modes are explained using examples of applications. The TROVIS-VIEW soft-
ware is explained in detail in the Operating Instructions uEB6661.
1.1 Notes on possible severe personal injury
DANGER
!
Risk of fatal injury due to electric shock.
Î Before connecting wiring, performing any work on the device or opening the de-
vice, disconnect the supply voltage and protect it against unintentional reconnec-
tion. Make sure that the contacts of the digital outputs are voltage-free.
Î Only use power interruption devices that can be protected against unintentional re-
connection of the power supply.
Î Do not remove any covers to perform adjustment work on live parts.