Samsung SCX-8030ND Series - Page 310

7.Trouble
s
● Code :
A1-7113
● Error message :
A
ctuator Motor Fail
u
● Symptom / Cause :
Waste toner motor does not work properly.
● Troubleshooting method :
1. Turn the machine off. Check if there is any obsta
c
2. Remove the waste toner bottle and reinstall it aga
3. Try to test print without the waste toner bottle.
If the same error occurs, replace the waste toner
m
If not, replace the waste toner bottle.
● Replacement part
JC31-00110C MOTOR-STEP
Service Manual
SCX-8030/8040 series
7-
1
s
hooting
u
re : #A1-7113. Please open/close door.
c
les around waste toner bottle.
in.
m
otor and controller.
SAMSUNG ELECTRONICS
Version 0.05
1
7