Samsung SCX-8030ND Series - Page 319

7.Trouble
s
● Code :
C1-1311
● Error message
:
Toner Cartridge Fai
l
● Symptom / Cause :
Toner supply is not enough.
● Troubleshooting method :
1. Specially when toner cartridge is initial install time
seal of toner cartridge is removed.
2. Thoroughly roll the cartridge five or six times to dis
t
3. Check if the pipe for toner supply is blocked.
4. Check if the toner supply shutter in the imaging uni
t
Check if the toner supply piper in the imaging unit is
Check
if
the
toner
supply
piper
in
the
imaging
unit
is
If the imaging unit has any problem, replace it.
● Replacement part
MLT-R607K : Imaging Unit
Service Manual
SCX-8030/8040 series
7-
2
s
hooting
:
l
ure: #C1-1311. Install toner cartridge again.
(total printed pages is under 1,000 page), check if the
t
ribute the toner evenly inside the cartridge.
t
is operating properly.
s blocked.
s
blocked.
SAMSUNG ELECTRONICS
Version 0.05
2
6